Alignments And Adjustments; Required Equipment; Ddc Edid Data Input; Hidden Key List - Samsung 305T - SyncMaster - 30" LCD Monitor Service Manual
Service manual
Hide thumbs
Also See for 305T - SyncMaster - 30" LCD Monitor:
- User manual (33 pages) ,
- Owner's manual (30 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
3 Alignments and Adjustments
This section of the service manual explains how to use the RS232 JIG.
This function is needed for AD board change and program memory (IC200) change.
3-1 Required Equipment
The following equipment is necessary for adjusting the monitor:
Computer with Windows 95, Windows 98, or Windows NT.
MTI-2055 DDC MANAGER JIG
3-2 DDC EDID Data Input
1. Input DDC EDID data when replacing AD PCB.
2. Receive/Download the proper DDC file for the model from HQ quality control department.
Install the below jig (Figure 1) and enter the data.
Parallel Connector
(25P Cable)
3-3 Hidden Key list
MTI-2055
DDC Manager
Connect Monitor
(Signal Cable)
Figure 1.
3 Alignments and Adjustments
3-1
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 305T - SyncMaster - 30" LCD Monitor and is the answer not in the manual?