Changing The Language - KitchenAid KSCX 3610 Instructions For Use Manual

501974402003_UK 8-10-2007
12 Changing and setting the menu parameters
12.6 Setting water hardness
The appliance is preset to display the descale message after a set period of time, based on a set water
hardness. You can make descaling less frequent by programming the appliance based on the actual lime
content in the water used. Proceed as follows:
• Remove the "Total Hardness Test" strip from its packaging then dip it fully in the water for a few
seconds, Remove it and wait around 30 seconds (until it changes colour and a number of red dots are
formed);
• Turn the appliance on by pressing the
• Press the
• Press the
test strip (for example, if there are 3 red squares on the test strip, press the button until WATER
HARDNESS 3 is displayed).
• Press the button to confirm the value. The coffee maker is now programmed to provide the
descaling warning when necessary, based on the actual hardness of the water.
12.7 Resetting factory default settings
If you change the original values, the factory default values can be reset as follows:
• Press the , button then press the
• Press the
• Press the button to reset the factory default values;
• Press the

13 Changing the language

To change the language, proceed as follows:
• Press the
and press the
message in English.
13:48 Pagina 22
button (fig. 4).
button then press the
WATER HARDNESS 4
button repeatedly until the number coincides with the number of red squares on the
RESET TO DEFAULT NO
button and the appliance displays "RESET TO DEFAULT YES";
button to exit programming mode or
button for at least 5 seconds until the appliance displays:
PRESS OK TO INSTALL ENGLISH
button for at least 3 seconds to confirm. The appliance then displays the setting
button repeatedly until the appliance displays:
button repeatedly until the appliance displays:
to change other parameters.
22