HP Proliant ML350 Generation 3 Specification page 12

QuickSpecs
Options
Processors Processors Processors Processors
Memory Memory Memory Memory (DIMMs)
Internal Storage Internal Storage Internal Storage Internal Storage
Optical Drives Optical Drives Optical Drives Optical Drives
Intel Xeon 3.06 GHz-512KB Processor Option Kit
NOTE: NOTE: NOTE: The 3.06 GHz processor option kit (PN 257916-B21) supports ProLiant ML350 G3 systems NOTE:
with 533 MHz front side bus only. This kit cannot be used in 400 MHz front side bus systems such as
those with 2.4 GHz, 2.2 GHz or 2.0 GHz processors.
Intel Xeon 2.80 GHz-512KB Processor Option Kit
NOTE: NOTE: The 2.80 GHz processor option kit (PN 314763-B21) supports ProLiant ML350 G3 systems NOTE: NOTE:
with 533 MHz front side bus only. This kit cannot be used in 400 MHz front side bus systems such as
those with 2.4 GHz, 2.2 GHz or 2.0 GHz processors.
Intel Xeon 2.40 GHz-512KB Processor Option Kit
NOTE: NOTE: NOTE: This processor option kit supports ProLiant ML350 G3 servers with 400 MHz front side bus NOTE:
only. This kit (PN 257913-B21) cannot be used in 533 MHz front side bus systems such as the 2.8
GHz systems.
Intel Xeon 2.20 GHz-512KB Processor Option Kit
NOTE: This processor option kit supports ProLiant ML350 G3 servers with 400 MHz front side bus NOTE: NOTE: NOTE:
only. This kit (PN 283702-B21) cannot be used in 533 MHz front side bus systems such as the 2.8
GHz systems.
Intel Xeon 2.0 GHz-512KB Processor Option Kit
NOTE: This processor option kit supports ProLiant ML350 G3 servers with 400 MHz front side bus NOTE: NOTE: NOTE:
only. This kit (PN 283701-B21) cannot be used in 533 MHz front side bus systems such as the 2.8
GHz systems.
NOTE: The ML350 G3 supports both interleaved and non-interleaved memory configurations. Base NOTE: NOTE: NOTE:
models ship standard with one 256MB DIMM or one 512MB DIMM (Array models). For best
performance automatically invoke interleaving by populating memory in identical pairs. If 1GB of
total memory is desired add three 256MB DIMMs to the base configuration. If 1.5GB of memory is
desired add one 256MB DIMM (to pair with the standard DIMM) and two 512MB DIMMs.
Interleaving and installation of memory in pairs is not required. Add any combination of memory
DIMMs below to operate in non-interleaved mode.
NOTE: Each SDRAM Memory kit contains one (1) DIMM. NOTE: NOTE: NOTE:
128MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 128 MB)
256MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 256 MB)
512MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 512 MB)
1024MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 1024 MB)
2048MB of Advanced ECC PC2100 DDR SDRAM DIMM Memory Kit (1 x 2048 MB)
ML3xx Two Bay Hot Plug SCSI Drive Cage
NOTE: The drive cage option kit (PN 244059-B21) has one 1" drive bay and one 1.6" drive bay. It NOTE: NOTE: NOTE:
installs in two available removable media bays.
CD-RW/DVD-ROM Combo Drive Option Kit
NOTE: The DVD-ROM drive is supported in the CD-ROM bay and in the removable media bay. If NOTE: NOTE: NOTE:
placed in the removable media bay, it requires the 2-Device IDE cable (PN 305381-B21).
DA - 11430 Worldwide — Version 38 — February 13, 2004
HP ProLiant ML350 Generation 3 HP ProLiant ML350 Generation 3 HP ProLiant ML350 Generation 3 HP ProLiant ML350 Generation 3
257916-B21
314763-B21
257913-B21
283702-B21
283701-B21
287494-B21
287495-B21
287496-B21
287497-B21
301044-B21
244059-B21
331346-B21
Page 12