Section 2: Initial Setup Charging; Connecting To Wi-Fi - Ematic FunTab pro Parents' Manual

2.
Initial Setup
Charging
Fully charge your FunTab Pro for 6 hours before the first use.
Note: Charging by the USB port on your computer will be slow.
We recommend using the included wall charger.

Connecting to Wi-Fi

1
First tap the clock, then
tap the settings icon.
3
Slide OFF to the right to turn
on Wi-Fi.
5
Enter your password.
If you accidently exit Kid Mode during setup, tap the Kid
Mode icon on the desktop to resume initial setup.
6
Use the included 5V Charger.
The battery indicator will
show that your device is
charging.
®
2
2
1
Tap Wi-Fi.
4
Tap to select your network.
6
When connected tap back.
(Located in the lower left corner)