Section 2: Initial Setup Charging; Turn On - Ematic CinemaTab ETH103 User Manual

2.
Initial Setup
Charging
Fully charge your tablet for 6 hours before the first use.
Attention: Charging by connecting to a computer will
be extremely slow. We recommend only using the
included wall charger.

Turn on

To start your tablet, press and hold the power key
for 2 seconds. The Ematic logo indicates that the
tablet is loading.
Once the screen loads, you will see a Welcome
Screen which will walk you through setting up your
tablet and customizing your Home Screen.
6
Use the included DC-5V wall
charger.
The battery indicator will
show that your device is
charging.