Input Wiring - Jensen POWER 400 - POWER 400 AMPLIFIER Installation And Operation Manual

POWER Amplifiers

Input Wiring

Most trunk/hatchback installations will require a 15-20 foot RCA cable, while
pickup trucks and under-seat mounting will require a 6-12 foot RCA cable.
Connect an RCA cable from your receiver to the RCA input on your amplifier.
Power 400.2
Input Wiring - Stereo Mode
RCA Cable
Input Wiring - Mono Mode
Power 900.1
Input Wiring - Mono Mode
RCA Cable
Input Wiring - Mono Mode
CAR STEREO /
SOURCE UNIT
RCA Cable
CAR STEREO /
SOURCE UNIT
CAR STEREO /
SOURCE UNIT
RCA Cable
CAR STEREO /
SOURCE UNIT
Power 760.4
The Power 760.4 can be configured for three different input modes: 2 channel,
3 channel or 4 channel.
CH2
CH4
CH3
CH4
CH1 CH3
LINE INPUT
CH2
CH1
LINE INPUT
8
2 Channel
MODE
2 3 4
LEVEL BASS EQ HPF LPF
X-OVER MODE
CH1&CH2
CONTROLS
FULL LPF HPF
2 3 4
min max 0dB 12dB 40Hz 300Hz 40Hz 300Hz
X-OVER
CH3&CH4
CONTROLS
min max 0dB 12dB 40Hz 300Hz 40Hz 300Hz FULL LPF HPF
LINE OUTPUT
3 Channel
MODE
2 3 4
LEVEL BASS EQ HPF LPF
CH4
X-OVER MODE
FULL LPF HPF
2 3 4
min max 0dB 12dB 40Hz 300Hz 40Hz 300Hz
X-OVER
CH3
min max 0dB 12dB 40Hz 300Hz 40Hz 300Hz FULL LPF HPF
LINE OUTPUT