Maintenance; Admin - D-Link DGL-5500 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator password, system name, remote management, and time settings.

Admin

Enter a new password for the Admin login name. Enter again to
Password:
verify password.
Gateway Name:
Enter a name for your router.
Enable Graphical
Enables a challenge-response test to require users to type letters
Authentication:
or numbers from a distorted image displayed on the screen to
prevent online hackers and unauthorized users from gaining
access to your router's network settings.
Enable HTTPS
Check to enable HTTPS to connect to the router securely. This
Server:
means to connect to the router, you must enter https://192.168.0.1
(for example) instead of http://192.168.0.1.
Enable Remote
Remote management allows the DGL-5500 to be configured
Management:
from the Internet by a web browser. A username/password is still
required to access the Web Management interface.
Remote Admin
The port number used to access the DGL-5500 is used in the URL. Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address
Port:
of the DGL-5500 and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the URL to access the router remotely.
Remote Admin
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the
Inbound Filter:
Delete icon to remove the rule. Details will display the current remote admin filter.
D-Link DGL-5500 User Manual

Maintenance

Admin
53