Wpa/Wpa2-Personal (Psk) - D-Link DGL-5500 User Manual

Section 4 - Security
It is recommended to enable wireless security on your wireless router before your wireless network adapters. Please establish
wireless connectivity before enabling encryption.
1. Log in to the web-based configuration by opening a web browser
and entering http://dlinkrouter.local./. Click on Setup and then click
Wireless Settings on the top.
2. Next to Security Mode, select WPA-Personal.
3. Next to WPA Mode, select Auto(WPA or WPA2), WPA2 Only, or WPA
Only. Use Auto if you have wireless clients using both WPA and WPA2.
4. Next to Cypher Type, select TKIP and AES, TKIP, or AES.
5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is
changed (3600 is default).
6. Next to Pre-Shared Key, enter a Wi-Fi password (key/passphrase). The password must be between 8-63 characters.
7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity
until you re-connect using the new Wi-Fi password.
D-Link DGL-5500 User Manual

WPA/WPA2-Personal (PSK)

34