Using The Convergence On-Screen Display - IBM P260 Installation & Operation Manual

Using the CONVERGENCE
screen Display
The CONVERGENCE settings allow you to adjust the
quality of the picture by controlling the convergence.
The convergence refers to the alignment of the red, green,
and blue color signals.
If you see red or blue shadows around letters or lines, adjust
the convergence.
Once the setting is adjusted, it will be stored in memory for
all input signals received.
1
Press the button.
The MENU OSD appears.
2
Press the ./> buttons to select "
and press the button again.
The CONVERGENCE OSD appears.
3
Press the ./> buttons to select the item you want to
adjust.
Select To
adjust the horizontal convergence
(Horizontal Convergence)
adjust the vertical convergence
(Vertical Convergence)
TOP adjust the vertical convergence at the
top of the screen
V CONVER TOP
BOT
adjust the vertical convergence at the
bottom of the screen
V CONVER BOTTOM
On-
CONVERGENCE"
CONVERGENCE
TOP
BOT
2 6
Customizing Your Monitor
4
Press the ?// buttons to adjust the settings.
For Press
/ . . . to shift red shadows to the right
(Horizontal Convergence)
? . . . to shift red shadows to the left
/ . . . to shift red shadows up and blue
(Vertical Convergence)
? . . . to shift red shadows down and
/ . . . to shift red shadows up and
TOP
V CONVER TOP
? . . . to shift red shadows down and
BOT
/ . . . to shift red shadows up and blue
V CONVER BOTTOM
? . . . to shift red shadows down and
Press the button once to return to the MENU OSD, and
twice to return to normal viewing. If no buttons are pressed,
the OSD closes automatically after about 30 seconds.
To reset, press the ? (reset) button while the OSD is on.
The selected item is reset to the factory setting.
and blue shadows to the left
and blue shadows to the right
shadows down
blue shadows up
blue shadows down at the top of
the screen
blue shadows up at the top of
the screen
shadows down at the bottom of
the screen
blue shadows up at the bottom
of the screen
9
EN