Specifications - Furuno FS-1503 Operator's Manual

GENERAL
Communication System
Frequency Range
Frequency Resolution
Class of Emission
Frequency Error
Number of Channels
Environmental
Power Supply
Radiotelephone Alarm Signal Generator
TRANSMITTER
Output Impedance
Output Power
Tune
Power Reduction
Controls

SPECIFICATIONS

Simplex, semi-duplex
1.6 to 27.5 MHz (transmit),
0.1 to 29.9 MHz (receive)
Transmit: 100 Hz
J3E SSB, suppressed carrier, signal channel containing ana-
logue information
H3E SSB, full carrier, signal channel containing analogue infor
mation, telephony; when 2182 kHz is first selected, H3E is
set.
J2B for DSC, NBDP; SSB, suppressed carrier, signal channel
containing quantized or digital information with the use of
a modulating sub-carrier, telegraphy for automatic recep-
tion
F3C weather facsimile, reception only
10 Hz (Both Transmitter and Receiver)
Custom channels: 199 max. Programmed by FURUNO autho-
rized service representatives (user may program Rx channels).
ITU SSB/TELEX Channels as listed in the APPENDIX.
2182 kHz (single action)
Transceiver unit: -20 C to +55 C
Antenna coupler: -30 C to +70 C
Relative humidity 93% at 40 C
13.6 VDC (+15%, -15%)
Receive: 1.5 A
Transmit (max.): 30 A
Two tones of 2200 Hz and 1300 Hz transmitted alternately.
50 ohms
J3E/H3E: 1.6 to 23 MHz, 150 W pep, 23 to 27.5 MHz, 75 W pep
J2B: 1.6 to 23 MHz, 100 W; 23 to 27.5 MHz, 50 W pep
10 W approx.
60 W approx.
Output HI/LOW, test (option)/send of two-tone alarm generator
SP-1
Receive: 10 Hz