Connection To A Tv Set - Hauppauge WinTV-DVB Installation And Reference Manual

WinTV-DVB / NEXUS Installation and Reference Manual
The A/V cable has the following connections:
3,5mm connector
Black Cinch
Yellow Cinch
Red Cinch
White Cinch
3,5mm Connector
Connect the 3,5mm jack plug with the " LINE In" input of the sound card.
Alternatively you can connect the internal audio output J3 on the WinTV-
NEXUS-s card with the internal input of the sound card. The cable needed for
it is not provided. The external connection to the "LINE in" on the sound card
should not be used if the J3 connection is being used.
Black Cinch
Digital audio output S/PDIF, for the connection to a digital audio input device
Yellow Cinch
Composite video output (TV Out) for the link of a television set.
Red Cinch
Audio output (right channel).
White Cinch
Audio output (left channel).
Link to a television set
To connect the WinTV-NEXUS to a television set you need a cable which has
a Euro Scart plug on one end and three Cinch plugs on the other. Pay atten-
tion to the correct Signal direction of the cable: the signal must go from the
Cinch plugs toward Scart plug. That is displayed either with arrows on the
Chinch to plugs, or on the Scart plug is " video in " is printed. Connect the
yellow, red and white Cinch plug according to the colors with the three Cinch
sockets on the A/V cable of the WinTV-NEXUS card.
4
- Stereo Audio Line Out
- S/PDIF digital audio-output
- Composite Video-output
- Audio right channel
- Audio left channel