Advertisement
Laser Range Finder
Item 67802
INSTRUCTIONS AND
PRECAUTIONS
Visit our website at:
http://www.harborfreight.com
Read this material before using
this product. Failure to do so
can result in serious injury.
SAVE THIS MANUAL.
When unpacking, make sure that the
product is intact and undamaged.
If any parts are missing or broken,
please call 1‑800‑444‑3353
as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools. Diagrams within this document may not be
drawn proportionally. Due to continuing improvements, actual product may differ slightly from
the product described herein. Tools required for assembly and service may not be included.
For technical questions, please call 1‑800‑444‑3353.
®
. All rights reserved. No portion of this document
Advertisement
Table of Contents
Related Manuals for Pittsburgh Pittsburgh Laser Range Finder
Summary of Contents for Pittsburgh Pittsburgh Laser Range Finder
- Page 1 Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
-
Page 2: Specifications
Specifications Important Safety Information 1. Never attach or use any other form Working Range 32′ of optical device with this product. Accuracy ±2% Use as intended only. Battery 1x 9V 2. Do not modify in any way as Product Label this may result in hazardous AVOID EXPOSURE radiation exposure. -
Page 3: Battery Installation/Replacement
Battery Installation / Replacement Before first use or if the Battery Indicator shows empty, then replace the battery: 1. Slide the Battery Cover down and off the back of the Meter. 2. Remove the old connected Battery. 3. Disconnect the old Battery. Dispose of it properly or recharge if rechargeable. - Page 4 1. Laser Opening: Components Laser light comes from this opening during use. Point away from eyes. 2. Sensor: This measures the location aimed at with the laser. Do not cover during use. 3. Display: READ Figure B: Display a. Area/Volume: Shows whether area or volume is being measured, and what part is being measured...
- Page 5 4. Buttons: 5. Measurement Base: Rest this base against the surface you want to measure from before taking a measurement. READ Figure C: Buttons a. Read: Takes a measurement. b. MEM Input: Stores current measurement to memory. c. MEM Recall: Displays stored measurement from memory, then clears it from memory.
-
Page 6: Distance Measurement
Addition Instructions Note: Addition can be used for distance, area, or volume Read the ENTIRE measurements. IMPORTANT SAFETY However, those measurements INFORMATION section are different units (for example, at the beginning of this feet, square feet, and cubic feet) document before set up and cannot be added together. - Page 7 Memory Area/Volume Calculation Note: Memory can be used for distance, area, or volume Note: Area/volume calculation measurements. cannot be exited before 1. Press MEM INPUT to store calculation is complete. displayed Total Result in memory. 1. Press button to enter If only a Current Result is area calculation mode or displayed, it will be stored instead.
- Page 8 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Replacement parts are not available for this item. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353...
Need help?
Do you have a question about the Pittsburgh Laser Range Finder and is the answer not in the manual?
Questions and answers