Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2017 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this
product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Pittsburgh 63730
Summary of Contents for Pittsburgh 63730
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 7. Lock the Dial (5) on its “0” setting by 4. Sliding Index Edge (7) should line up at “0”. tightening the Dial Adjustment Lock (3) clockwise. The Caliper is ready to use. Figure A Page 2 For technical questions, please call 1-888-866-5797. Item 63730...
- Page 3 Outside Diameter Jaws over the object, making sure that the rests squarely on the Jaws. See Figure C, below. Figure F Figure C Item 63730 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Parts List and Diagram Part Description Thumb Roll Outside Diameter Jaw Dial Adjustment Lock Dial Adjustment Dial Slide Scale Lock Sliding Index Edge Inside Diameter Jaw Step Measuring Surface Depth Measuring Blade Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
Need help?
Do you have a question about the 63730 and is the answer not in the manual?
Questions and answers