Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2017 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this
product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
17e
Advertisement
Related Manuals for Pittsburgh 63615
Summary of Contents for Pittsburgh 63615
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
- Page 2 4. Keep bystanders out of the area. If unreadable or missing, contact 5. Inspect before every use; do not use Harbor Freight Tools for a replacement. if parts are loose or damaged. Page 2 For technical questions, please call 1-888-866-5797. Item 63615...
-
Page 3: Battery Installation
Figure A Record Serial Number Here: Note: If product has no serial number, record Note: Replacement parts are month and year of purchase instead. not available for this item. Item 63615 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 63615 and is the answer not in the manual?
Questions and answers
how do i calibrate the tool? It reads 37 degrees all the time.
To calibrate the Pittsburgh 63615 Digital Angle Gauge, follow these steps:
1. Place the gauge on a flat, level surface, such as a table top that is parallel to the floor.
2. Press the “Calibrate” button to reset the unit to 0 degrees.
This should correct the constant 37-degree reading if the device is functioning properly.
This answer is automatically generated