Interfaces - Oki B4250 User Manual

INTERFACES

Your printer is equipped with a selection of data interfaces:
1. Parallel – For direct connection to a PC. This port requires a
bi-directional (IEEE 1384 compliant) parallel cable.
2. USB – For connection to a PC running Windows 98 or above
(not Windows 95 upgraded to Windows 98) or Macintosh. This
port requires a cable conforming to USB version 2.0 or above.
The operation of a printer is not assured if a USB compatible
device is connected concurrently with other USB-compatible
machines.
When connecting multiple printers of the same type, they
appear as *****, ***** (2), ***** (3), etc. These numbers
depend on the order of connecting or turning on each printer.
3. Serial – for direct connection to a device that uses serial
printing (available as an option).
4. Ethernet – For network cable connection. This port is standard
on the B4250n, B4350n and B4350nPS and optional on the
B4250, B4350.
l It is not recommended that you connect serial/USB and parallel
cables to the printer simultaneously.
l Interface cables are not supplied with your printer.
If you are connecting your printer directly to a stand alone computer
proceed to the chapter entitled "Printer Drivers".
If your printer is to be installed as a network printer, please refer to the
relevant section in the User's Guide for the network interface card for
further details on how to configure the network connection before
installing the printer drivers.
Administrator's authority is required when installing a network
connection.
NOTE
NOTE
INTERFACES > 43