Table of Contents
Advertisement
Switch off the printer and allow the fuser to cool for about 10 minutes
before opening the top cover.
1.
Press the top cover release button and open the printer's top
cover fully.
If the printer has been powered on, the fuser may be hot. This area is
clearly labelled. Do not touch.
2.
Pull the coloured lever on the right side of the toner cartridge
towards the front of the printer to close the cartridge then
remove the used toner cartridge.
3.
Follow the installation instructions on or inside the box
containing the new toner cartridge to install the new cartridge.
4.
Gently wipe the LED array surface with the LED lens cleaner
that came with the new toner cartridge or soft tissue.
5.
Close the top cover and press it down to latch it closed.
WARNING!
CONSUMABLES AND MAINTENANCE > 69
Advertisement
Table of Contents
