Advertisement
Quick Links
Set up
Choose stable surface
Place machine on a stable
surface.
Shelves are not recommended.
Operation
Before first use:
Punch scrap paper to clean the
rust preventative from the
punch dies.
Maintenance
The machine
and the parts
1
Measure
Determination of the diameter
Put the back on the edge against
the measuring scale.
Read the diameter of the binding
element (e.g. 3/8")
Office Zone
Model ECO-S Punch and Binding Machine
Place requirement.
Keep working space free:
Right 8" (20 cm)
Left 6" (15 cm)
1-800-543-5454
1-800-543-5454
(
801) 927-3026
2:1 Pitch
Have binding elements near
work area.
Store binding elements in the
special boxes.
Size: 24 x 36 cm
9.5" x 14.2"
Protect sensitive furniture surface.
The machine stands on soft plastic feet.
Some surfaces may discolor after a
time.
Field of application:
Punch:
Paper:
Max 30 pages 20 # stock for
comfortable punching:
15-20 pages
Cardboard
Max thickness 1.5 mm
Plastic Foil
Max 2 pages for 0.3 mm thickness
Max. binding thickness 28 mm (1-1/8")
Approx. 280 pages 20 # stock.
1
Advertisement
Related Manuals for Officezone ECO-S Punch & Binding Machine 2:1 Pitch
Summary of Contents for Officezone ECO-S Punch & Binding Machine 2:1 Pitch
- Page 1 Office Zone 1-800-543-5454 1-800-543-5454 801) 927-3026 Model ECO-S Punch and Binding Machine 2:1 Pitch Set up Choose stable surface Place requirement. Have binding elements near Protect sensitive furniture surface. work area. The machine stands on soft plastic feet. Place machine on a stable Keep working space free: Store binding elements in the Some surfaces may discolor after a...
- Page 2 Adjust Scale for adjusting the diameter Adjust distance edge to Adjust format 11” Paper guide right Adjust format 8.5” Paper according diameter turn knob Pull pins guide left Pull pins Release attachment screw, determine Turn knob index to the Screw down the right paper guide, pull scale, adjust diameter, tighten according diameter (e.g.
- Page 3 Adjust Press clamping fixture After the paper had been placed Put binding element under the Binding element must stand on the binding element, remove closing bar. vertically at the back of the the paper with the element from closing bar the clamping fixture.