Tips After Pairing The Devices; Receiving A Call - Garmin fleet 590 Owner's Manual

Hands-Free Phone Calls

Tips after Pairing the Devices

• After the initial pairing, the two
devices can connect automatically
each time you turn them on.
• When your phone is connected to
your device, you are ready to make
phone calls.
• When you turn on the device, it tries
to connect to the last phone to which
it was connected.
• You might need to set your mobile
phone to connect to the device
automatically when it is turned on.

Receiving a Call

When you receive a call, select an
option:
• Select Answer.
• Select Ignore to ignore the call.
Using in-call options
1
While on a call, select
2
Select an option:
• To transfer audio to your phone,
select Handset.
22
.
TIP: You can use this feature if
you want to turn off your device
and remain on the call, or if you
need privacy.
• To transfer the audio from your
phone to your device, select
Hands-free.
• To display a keypad, select
Keypad.
TIP: You can use this feature to
use automated systems, such as
voice mail.
• To mute the microphone, select
Mute.
• To hang up, select End Call.
Garmin fleet 590 Owner's Manual