Frigidaire 242111904 Use & Care Manual page 7

Outils n_cessaires:
Tournevis & __
t6te Phillips
TM
Top Hinge Top Hinge
Cover Front,, FJ_t Cover Rear
Screw _ _ Screw
Hinge Bottom
Screw Hinge __
Screw
Getting through narrow spaces
If your refrigerator will not fit through an
entrance area, you can reduce its size by
removing the doors. Check first by measuring
the entrance.
To prepare for removing the doors:
1 Make sure the electrical power cord is
unplugged from the wall outlet.
3
4
Open both doors and remove the toe
grille (as explained in the Installation
Instructions that came with your
appliance).
Remove any food from the door shelves.
Close the doors.
To remove the refrigerator top
hinge cover:
1 Remove the three screws from each cover
over the top door hinges.
2 Lift hinge cover straight up and off.
Rear Cover Front Cover
Screw Screws
Top
Hinge
Screws
Top
Hinge
/
,/
To remove the refrigerator door:
1 Trace lightly around the door's top hinge
with a pencil. This makes reinstallation
easier.
Remove the two screws from the top
hinge. Lift the door off of the bottom
hinge and set it aside.