Removing Collected Water; Fault Codes - Kenmore 253.25003 Use & Care Manual

Dehumidifier Feature
(continued)
7. To shut the unit down, press the ON/OFF button.
NOTE: While the unit is plugged in, the power indicator will remain lit. Only removing the plug will extinguish this light.

Fault Codes

If the display reads "AS" or "ES" , a sensor has failed. Contact 1-800-4-MY-HOME

Removing Collected Water

1. Emptying the bucket:
a. When the bucket is full, the unit will shut down and the BUCKET FULL indicator light will illuminate.
for repair.
®
7