Nvidia Quadro Workstation User Manual page 118

Chapter 7
Configuring Key ForceWare Graphics Driver Features
4 From the driver settings list, click a setting that you want to change for the
selected application profile. Notice that the setting is highlighted.
5 Select the check box (inserts a check mark) for that setting and click Apply. Notice
that its slider appears at the bottom of the page.
6 If the Application-controlled check box is checked, click the check box to clear the
check mark and click Apply.
7 Use the slider to modify the setting to suit your needs. Refer to the following
sections for additional information:
8 Repeat steps 4 through 7 for each driver setting you want to change.
9 Be sure to click Apply after each change you make to a driver setting.
Note: If you do not want to save these settings with a new name, these settings
automatically become part of the existing profile. But you can always click the
Restore button to restore the settings to their original state.
10To save the changed profile settings with a new name, click the Modify Profile
button, then click Save As to display the Save Settings dialog box
11 From the Save Settings dialog box, you can either retain the existing name or
rename the profile.
If you retain the existing name, thus overwriting the profile with the new settings,
you can always click the Restore button to restore the original settings when you
select this profile from the Application profile list.
If you renamed the profile
the Remove button appears when you retrieve the profile from the Application
profile list. You can always remove these types of profiles from the list.
106
check the associated check box, and save the profile with a new name. Or if
you don't save the profile with a new name, you can always use the Restore
button to restore the profile to its original state.
(Figure 7.6), then it is considered a "new" profile and
(Figure
Quadro Workstation User's Guide
7.5).