Jenn-Air WM236 Use And Care Manual page 6

Oven Light Switch
• Push in switch to turn oven light on or off. Light cannot be turned on during the
self-cleaning process. For some models, the oven light automatically comes on
whenever the oven door is opened.
Selector Knob
• This knob controls the oven operation. To operate the oven, turn to desired setting,
then turn TEMPERATURE knob to desired setting.
The settings are:
OFF The oven will not operate when knob is on this setting. Keep knob
on this position when oven is not is use.
BAKE Use for radiant bake (conventional) baking or roasting.
TIME BAKE Use with clock controls for automatically starting and stopping
oven when baking or roasting in the radiant bake oven.
CONVECT Use for convection baking or roasting (Selected Models Only).
TIME CONMECT Use with clock controls for automatically starting and stopping
oven when baking or roasting in the convection oven (Selected
Models Only).
BROIL Use for top browning or oven broiling of foods.
CLEAN Use for self-cleaning process.
Temperature Knob
• Use to set oven temperature. Be sure the indicator square is in line with the exact
temperature desired. This knob is used with all oven operation settings noted on
the SELECTOR knob.
Bake Indicator Light
• Indicates when oven is turned to an operating position other than the CLEAN setting.
Light will glow until the desired temperature is reached. It will cycle on and off
as this temperature is maintained during cooking.
Lock Indicator Light
• Will glow after the oven door has been locked and after the oven temperature is
over 550°F. Door will lock automatically and cannot be opened until oven temperature
drops below 550°F.
Clean Indicator Light
• Indicates when all controls have been properly set for the self-cleaning process.
Light will remain on during the entire cleaning process.
Clock Controls and Minute Timer
• Features time of day, MINUTE TIMER, and clock controls to start and stop oven
automatically. (See pages 8-11.)
Door Lock Lever
• Use to lock oven for self-cleaning process.