Fisher & Paykel 331T Installation Instructions And User Manual page 11

Fit new cap door closing to bottom hinge bracket. The
new cap door closing is a mirror image of the existing part.
Remove the hinge hole covers from the ends of the door
using a narrow blade to prise them away from the door.
The hinge hole covers are the components without holes.
Keep them for re-use.
Move the hinge bearing on the door to the opposite side
of the top of the door (refer Fig.4).
Fit the new hinge bearing closing hook to the opposite
side of the bottom door. The new hinge bearing hook is a
mirror image of the existing part.
Remove the old hinge bearing closing hook from the door
(refer Fig.5).
Replace the door. Replace the top hinge bracket and
secure with the top hinge bracket screws making sure that
the door is square.
Hinge Cover
Hinge Bearing
Closing Hook
Top Hinge
Bracket
Bottom Hinge
Bolt
Fig.6 Conversion kit
Door conversion
Fig.4 Door hinge bearing
Fig.5 Closing hook
Hinge Bearing
Cap Door Closing
9
Hinge Hole
Cover
Bottom Hinge
Bracket