Hotpoint 22 Owner's Manual & Installation Instructions page 6

About the shelves and bins.
Sfide-Out Spil/proof Shelf (on some models)
The slide-out spillproof shelf allows you
to reach items stored behind othe_. The
spedal edges are designed to help prevent
spills from dripping to lower shelves.
Toremove:
Remove all items ti'om shell
0 Slide the shelf out tmfil it stops.
I,iti the fl'ont edge of the shelf tmtil the
central tabs are above the fl'ont bin:
0 Continue pulling the shelf torward
tmtil it can be removed.
To replace:
Place the rear shelf tabsjust in ti'ont ot
the central notches on the shelf fi'ame,
Slide the shelf in tmfil the central tabs
are slightly behind the front bin:
I,ower the shelf" into place tmtil it is
horizontal and slide the shelf in.
Make sure that the shelf sits fiat after re/bsta//ation
and doesn't move free/}/from side to side.
Make sure you push the shelves all the way in
before youclose the door
,Finger hold
tl
ii ,Snugger
tl
11
Adjustable Bins on the Door
A(!iustable bins can easily be carried ti'om
i'e_l_gei'atof to woFk aI'ea.
Toremove: I,ift the bin straight up, then
pull out.
Toreplace or relocate: Engage the bin in the
molded SUl)ports of the do())', and push in.
Bin will lock in place.
The snuggerhelps
prevent tipping, spilling
or sliding of small items stored on the door
shelf. (h_il) the finger hold near the rear of
the snugger and move it to fit your needs.
Non-Adjustable Shelves on the Door
Toremove: I,ift the shelf straight
up, then
l)ull out.
Toreplace: Engage the shelf in the molded
supl)orts on the door and push down.
It will lock in place.
Freezer Tilt Out Bin (on some models)
Push the button as you tilt out the bin.
To remove: Hold the sides of the bin and
lift it straight ill) , then pull ()tit.
Toreplace:Engage the ends of the bin
in the molded SUl)ports on the door and
push down. It will lock in place.
NOTE: Do not overloadthe bin.