Connecting To A Computer; Installing Finepixviewer - FujiFilm Finepix Real 3D V1 Owner's Manual

Connecting to a Computer

The supplied FinePixViewer software can be used to copy pictures between the viewer
and a computer. It can also be used to view, organize, and print pictures stored on the
computer, to create two JPEG images from a multi-picture fi le, or to create a multi-pic-
ture fi le from two JPEG images. Before proceeding, install FinePixViewer as described
below. Do
NOT

Installing FinePixViewer

Installing FinePixViewer
1
Confi rm that the computer meets the following system requirements:
Preinstalled versions of Windows Vista, Windows XP Home Edition (Service Pack 2), or Windows
OS OS
XP Professional (Service Pack 2)
Other Other Built-in USB port recommended. Operation is not guaranteed with other USB ports.
3 Caution
For information about Windows 7, visit http://www.fujifilm.com/support/download/camera/
software/. Other versions of Windows are not supported. Operation is not guaranteed on
home-built computers or computers that have been upgraded from earlier versions of Win-
dows.
2
Start the computer. Log in to an account with administrator privileges before pro-
ceeding.
3
Exit any applications that may be running and insert the installer CD in a CD-ROM
drive.
Windows Vista
If an AutoPlay dialog is displayed, click SETUP.exe. A "User Account Control" dialog will then
be displayed; click Allow.
The installer will start automatically; click Installing FinePixViewer and follow the
on-screen instructions to install FinePixViewer. Note that the Windows CD may be
required during installation.
4
When prompted, remove the installer CD from the CD-ROM drive and click Restart
to restart the computer. Store the CD in a dry location out of direct sunlight in case
you need to re-install the software. The version number is printed at the top of the
CD label for reference when updating the software or contacting customer support.
24
connect the viewer to the computer before installation is complete.