Attaching The Stand - FujiFilm Finepix Real 3D V1 Owner's Manual

Attaching the Stand

Attach the stand to the frame.
1
Place a towel or other soft cloth on a level surface such as a table and place the viewer
face down on the cloth.
2
Gently screw the stand into the hole on the back of the viewer as shown.
3
Stand the viewer as shown.
Wide orientation
1 Note
The stand can be used in tall orientation when viewing D images, but must be in wide ori-
entation to provide a C eff ect with C images. Tall orientation pictures can be rotated for
display in wide orientation using the ORIENTATION option in the setup menu.
3 Caution
The viewer should only be used on a table or other fl at horizontal surface; do not hang the viewer
from a picture hook or mount it on a wall or other vertical surface using double-faced tape.
2 Tip: The Tripod Mount
The viewer can also be placed on a tripod using the tripod mount.
Tall orientation
7