Inserting Memory Cards - FujiFilm Finepix Real 3D V1 Owner's Manual

Inserting Memory Cards

The viewer can be used with the memory cards listed on page 29 (for information on
supported fi le formats, see page 30). Before inserting memory cards into the viewer, be
sure to copy any important fi les to a computer. To insert a memory card:
1
Open the card slot cover.
1 Note
The viewer turns off automatically when the cover is opened.
2
Holding the memory card as shown by the indicator next to the memory card slot,
slide the card in until it clicks into place.
3 Caution
Be sure the card is in the correct orientation; do not insert it at an angle or use force.
1 Note
The viewer may be unable to display fi les that have been modifi ed with a computer.
Removing Memory Cards
Open the card slot cover, gently press the card in, and release it slowly.
3 Caution
The memory card may spring out if you remove your fi nger immediately after pushing the card in.
8
xD-Picture
SD/SDHC
card
card