Download  Print this page

Whirlpool MK1157XJ Installation Instructions

Built-in trim kit.
Hide thumbs
   

Advertisement

BUILT-IN TRIM KIT INSTALLATION INSTRUCTION
(KEEP FOR FURTHER REFERENCE)
FOR WHIRLPOOL TRIM-KIT MODELS'
MK1157XJ, MK1150XJ
i
° FOR USE WITH WHIRLPOOL AND KITCHEN AID MICROWAVE OVEN MODELS :
GM8155XJ, KCMC155J, YKCMC155.1
• UL AND CSA LISTED - FOR USE OVER ELECTRIC HEAT SOURCE
(INCLUDING MODELS-27": (Y)RBS275PD, (Y)GBS277PD, (Y)KEBI171D, (Y)KEBS177D
-30" : (Y)RBS305PD, (Y)GBS307PD, (Y)KEBI101D, (Y)KEBS107D
PARTS LIST
Trim Kit
1• Screws
(4 Req'd 2 Extra)
Upper Duct (1)
Rear Duct (1)
BottomDuct (1)
CUTOUT DIMENSIONS
Height
Width
Depth
(min.)
27"
30"
17 1/4"
25 I_,,
281/2"
21 lr2" with flush mount receptacle.
(23 3/4"if non-flush receptacleis used.)
I
I
I
I
1/2" Screws
(16 Req'd 2 Extra)
Anti-Tip
Bracket (1)
Bottom
Bracket (1)
Template (1)
r__
Depth
Width
;'#:
_
I Height
P/NO.: 3828W5U0078/8172219

Advertisement

Table of Contents

   Related Manuals for Whirlpool MK1157XJ

   Summary of Contents for Whirlpool MK1157XJ

  • Page 1 (KEEP FOR FURTHER REFERENCE) FOR WHIRLPOOL TRIM-KIT MODELS' MK1157XJ, MK1150XJ ° FOR USE WITH WHIRLPOOL AND KITCHEN AID MICROWAVE OVEN MODELS : GM8155XJ, KCMC155J, YKCMC155.1 • UL AND CSA LISTED - FOR USE OVER ELECTRIC HEAT SOURCE (INCLUDING MODELS-27": (Y)RBS275PD, (Y)GBS277PD, (Y)KEBI171D, (Y)KEBS177D -30"...
  • Page 2 STEP1 Electrical Shock Hazard Disoonnect power before installing trim kit. Replace all panels before operating. Failure to do so can result in death or electrical shock. 1. Remove any loose items inside the Front microwave oven. 2. Disconnect the microwave oven before Rear proceeding with installation.
  • Page 3 STEP3 1. On the cutout floor, mark hole centers for the anti-tip brackets as shown using the supplied template. Be sure to align the center line of template to center line of cutout floor. 2. Ddll two holes for anti-tip bracket. (use 7/64"...
  • Page 4 STEP 5 Pilot Ilole Cutout Opening 1. Place the trim kit frame over the microwave oven. Important Note : Trim kit frame orientation is important. Orient the frame so that louvers are sloping downward to the front. (See Figure Detail "B"). 1"Screws(4) 2.

This manual is also suitable for:

Mk1150xj

Comments to this Manuals

Symbols: 0
Latest comments: