Kenmore 318201435 Installation Instructions Manual page 2

Overhead Cabinet Should Not Exceed
a Maximum Depth of 13" (33 cm)
A Min.
30" (76.2 cm) Min.
Clearance Between the
Top of the Cooking
Platform and the Bottom
of an Unprotected Wood
or Metal Cabinet _i
31
24" (61 cm)Mi_
Bottom of Wood or Metal
Cabinet is Protected by
Not Less Than 1/8" Flame
Retardant Millboard
Covered With Not Less
Than No. 28 MGS Sheet
Steel, 0.015" (0.4 mm)
Stainless Steel, 0.024"
(0.6 mm) Aluminum or
0.020" (0.5 mm) Copper
18"
(45.7 cm)
2" (5.1 cm)Min.
Recommended
Distance Between
Rear Edge of Cutout
and Nearest 10"
Combustible Surface ( 25.4 cm)
Above Countertop
J
G
2 1/2" (6.4 cm) Min. rom
Edge of Cutout to Front Edge
of Countertop
Approximate Location
of Junction Box
7V2" (19.1 cm)
Min. From Edge
of Cooktop to
Nearest
Combustible
Wall (Either
Side of Unit).
It is not recommended to use
drawer underneath cooktop.
Empty space is needed for
installation purpose.
Letters on this figure refer to chart on front page.
_To eliminate the risk of burns
or fire by reaching over heated surfaces,
cabinet storage space located above the
cooktop should be avoided. If cabinet
storage is provided, risk can be reduced by
installing a range hood that projects
horizontally a minimum of 5" (12.7 cm)
beyond the bottom of the cabinets.
Figure 2 - COUNTERTOP CUTOUT OPENING