Advertisement
1
2
Remove
the dust compartment.(refer
to page g)
Set the dust compartment
to the parallel
position.Open
the trapdoor,then
push the
release
button E and pull out the main
filter.
OThe main filter and prefilter
will be
removed
at the same time.
Caution:
Do not push the release
button
E at the upright
position.
As this may drop or damage
the
main
filterand
prefilter.
i
nE
Clean
the main filterand
prefilterwith
a soft-bristled
brush and rinse with cold water.
Allow
both items to dry completely.
Caution:
eDo not use a hard-bristled
brush to clean filters.
Thismayresultindamage
to the
filters.
• Do not attempt
to dry with a hair dryer or by
placing
ina clothes
dryer.Hot
air may cause the
filters
to warp.
Cleaning
Utensil
To maintain
optimum
suction
power, the dust filter fins should
be kept clean of dirt.
l Clean the filter fins free of dirt with the forked end of cleaning
utensil as shown.
Reattaching
the filters
Insert themain
filterinto
the
prefilter
as shown.
Cleaning
Utensil
Hold ontothe
mainfilter
and insert
into
the
dust compartment.
Main Filter
Prefilter
Close the trapdoor.
®Align the ribs ofthe
main filter to match
the shape of the opening
in the dust
compartment
and press firmlyto
insert.
Dust Compartment-
Hole
10
Advertisement
