Kenmore 110.1421 Series Owner's Manual page 2

Soak
Features agitation followed by unlimited soak time to help
remove heavy soils and stains that need pretreatment. After the
soaking has finished, you should reset the washer to a Spin
setting to remove water. The Soak cycle should be followed by an
Ultra Clean or Permanent Press cycle with additional detergent.
Automatic 2nd Rinse
Removes excess detergent residue. May be automatically added
to the Heavy Duty cycle by setting the RINSE OPTIONS Control
to 2nd Rinse before you start the washer. You won't have to
come back later to select a second rinse.
Manual Rinse & Spin
May be used when an extra rinse is needed to remove additional
detergent residue. Set WATER LEVEL Control, then WATER
TEMPERATURE Control. Set RINSE OPTIONS Control (if
available) to One Rinse. You should then set Cycle Selector
(Timer) Control to a Rinse setting.
Spin Only
A drain and spin may help shorten drying times for some fabrics
by removing excess water. Set RINSE OPTIONS Control (if
available) to One Rinse. You should then set Cycle Selector
(Timer) Control to a Spin setting.