Menu Tree - Furuno 1623 Operator's Manual

MENU TREE

MENU/ESC
TX/ST-BY (TX, ST-BY )
key
INT REJECTION (OFF, LOW , MEDIUM, HIGH)
ECHO STRETCH ( OFF , LOW, HIGH)
FTC ( OFF , ON)
NOISE REJECTION (OFF, LOW , HIGH)
WATCHMAN TIME ( OFF , 5, 10, 20 min)
HDG LINE OFF (Temporarily turns off heading line.)
ECHO TRAIL ( OFF , 30 s; 1, 3, 6 min, CONTIN.)
TRAIL BRILLIANCE ( LOW , HIGH)
SYSTEM MENU
Turn on power
MENU/ESC
key
+
SIMULATION ( OFF , ON, HIGH)
POWER/BRILL
TEST (Tests display unit.)
key
LCD PATTERN (Displays test pattern.)
MEMORY CLEAR (Restores default menu settings.)
NMEA PORT ( IN/OUT, IN/IN)
NMEA OUTPUT ( OFF , ON)
GPS WAAS ( OFF , WAAS 00-27)
GO TO RADAR SETUP
LANGUAGE ( ENGLISH , JAPANESE, Others)
RANGE UNIT ( nm , km, sm)
DEPTH UNIT ( m , ft, fa, HR, pb)
SPEED UNIT ( kt , km/h, mph)
WIND UNIT ( kt , km/h, mph, m/s)
TEMP UNIT ( C, F )
NAV DATA (OFF, , ,
KEY BEEP (OFF, ON )
RINGS (OFF, ON )
WAYPOINT MARK (OFF, ON )
PANEL DIMMER (OFF, LOW, MEDIUM, HIGH )
HUE ( DAY , NIGHT)
TRIPLOG RESET?
EBL REFERENCE (TRUE, RELATIVE )
BEARING READOUT (TRUE, MAGNETIC )
CURSOR POSITION (LAT/LON, RNG&BRG )
TRIP SOURCE ( LAT/LON , SPEED)
WIND SPD/DIR (TRUE, APPARENT )
SHIFT MODE ( MANUAL , AUTO)
AUTO SHIFT SPEED (1-99 (kts), 15 )
TX SECTOR BLANK ( OFF , ON)
BLANKING START (000-359 , 000 )
BLANKING AREA (000-135 , 000 )
LOCAL TIME SETUP (-13:30 - +13:30, 0:00 )
ANTENNA SPEED (24rpm, AUTO )
RANGE
nm, sm: 0.125 , 0.25 , 0.5 , 0.75 , 1, 1.5 , 2, 3 , 4, 6 , 8, 12 , 16 )
km: 0.25 , 0.5 , 0.75 , 1, 1.5 , 2, 3 , 4, 6 , 8, 12 , 16, 24 )
RADAR SETUP
SCANNER TEST (Tests antenna unit.)
MN-1
)
HEADING ADJUST (Adjusts heading.)
TIMING ADJUST (Adjusts timing.)
SET ON TIME (Displays total hours
radar has been powered.)
SET TX TIME (Displays total hours
of transmission.)