Table of Contents
Advertisement
Setting Oven Controls
Notei The time 0fday
must first be set in 0rder to operate the
oven.
To Set the Clock
When the range is first plugged
in, or when the power
supply to the range has been interrupted, the display will
flash "12:00".
1.
Press _.
2.
Within 5 seconds,
press and hold the
/x
orv
until
the correct
time of day appears
in the display.
To Set the Minute Timer:
1.
Press _.
2.
Press the
._x to increase the time in one minute
increments.
Press and hold the
/x
to increase the
time in 10 minute increments. The timer can be set for
any amount of time from 1 minute to 11 hours and 59
minutes.
Note: If you press the v
first, the timer will advance
to
11 hours and 59 minutes.
3.
The display shows the timer count down in minutes
until one minute remains.
Then the display will count
down in seconds.
4.
When the set time has run out, the timer will sound a 3
second beep. 0:00 will appear
in the display
until
is pressed.
Note:
While the minute timer is counting
down, the ":" will
flash. The minute timer does not start or stop cooking.
It
serves as an extra timer in the kitchen
that will beep when
the set time has run out. The minute timer can be used
alone or during any of the other oven functions.
When the
minute timer is in use with any other function,
the minute
timer will be shown
in the display.
To view other functions,
press the pad for that function.
To Change
the Minute
Timer
while
it is in use:
While the timer is active and shows in the display,
press
and hold the /,_
or v
to increase
or decrease
the time.
To Cancel
the
Minute Timer
before
the set time
has
run
out:
Press
_.
Changing
the Temperature
Display
Mode
(some models)
The electronic
oven control temperature
display mode was
factory
preset to display (Fahrenheit)
°F oven tempertaures.
Note: Oven cooking
temperatures
may be set from 170°F to
500°F (77°C to 260°C).
To change the Temperature
Display Mode to °C
(Celsius)
or from °C to °F (do not use Bake or Broil while
changing the Temperature Display Mode):
1.
Press & hold the
t key pad for 6-8 seconds until For
Cappears in the display. Note: At this time the display
will show the current Temperature Display Mode
whether set for For C.
2.
Press the /x. key pad once to choose the (Fahrenheit)
°F mode; or press the v
key pad once to choose the
(Celsius) °C mode.
3.
After 5 seconds, the display will flash. To accept the
change, wait 5 more seconds until the oven control
beeps once. To complete the change skip step 4 below,
OR;
,
If at any time during the process of changing the
Temperature Display Mode (For C) you decide the
change is not desired, press the
_key pad before
the oven control beeps once to cancel the process.
5.
The control will beep once. The display will then return
to the time of day with any temperature display mode
change you may have requested.
To Set or Change
the Temperature
for Baking
The oven can be programmed
to bake at any temperature
from 170°F to 500°F.
To
1.
2.
3,
4,
Set the Controls
for Baking:
Press
. ,....
appears
in the display.
Within
5 seconds,
press the
A
or v
• The display
will show "350°F. '' By pressing
and holding the /x.
or
v,
the temperature
can then be adjusted
in 5°F
increments.
When the
,A. or v
is released,
the oven will begin
heating
to the selected
temperature.
When the
displayed
temperature
reaches
the desired
baking
temperature,
the control will beep one (1) time.
To cancel the baking
function,
press _
.
To Change the Oven Temperature
after Baking
has
Started:
1.
Press
and make sure the bake temperature
is
displayed.
2.
Press the
A
or
V
to increase
or decrease
the set
temperature.
Advertisement
Table of Contents
