Filter Cleaning - Kenmore 116.29229 Use & Care Manual

CANISTER
1. Open the canister hood.
2. Check to see that the dust bag is properly
installed. See BAG CHANGING (page 15)
for instructions.
3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY
FILTER CLEANING (page 16) for instructions.
HOOD AND TOOL STORAGE
COVER
It is normal for the canister hood and tool
storage cover to come off when opened
further than needed. Line up the hinge slots,
insert the hinges into the slots, and close the
hood and tool storage cover to reinstall.
HOSE
1. Line up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place.
Hose
Latch
Tab
Notch
To remove: Press hose latch tab upward and
pull up on hose.
Handle
Handle
Button
Handle
Quick
Release
2. Insert handle
into wand until
handle button
snaps in place.
Be sure hose is
not twisted.
To remove:
Press handle
quick release
button and pull
up on handle.
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage. Store hose in a loosely coiled
position so the hose covering is not stressed.
CAUTION
Never open canister hood with the tool
storage cover open. This wlll help to
_revent damage from occurring to the
:anisfer hood and/or fool storage cover.
=8=