Refrigerator Doors - Kenmore 2318604B Use & Care Manual

'% _ _ : ...... ,,_ ,% ,_ _,_
TOOLS NEEDED:
1/4", I_2",
and 5/16"hex-head socket wrenches, a fiat-head screwdriver and a Phillips screwdriver.
IMPORTANT: Before you begin, turn the refrigerator control OFE Unplug refrigerator or disconnect power. Remove food and any
adjustable door or utility bins from doors.
NOTE: It may only be necessary to remove either the door handle or the doors to get your product through the doorway of your
residence. Measure the door opening to determine whether to remove the refrigerator handles or the doors.
Door Removal
Top Left Hinge
A. Do Not Remove Screw
Base Grille
Handle Removal
(Optional)
Top Right Hinge
A. Do Not Remove Screw
Bottom Hinge
A. Do Not Remove Screw
Door Alignment
A. Leveling Screw
Handle Removal (optional)
1. Apply fin-n pressure with your hand on the face of trim. Slide
top trim up and bottom trim down away from handle. Lift trim
pieces off shoulder screws. See Graphic 1.
2. Remove handle screws and handles.
3. Move refrigerator into place. Replace handles as shown. See
Graphic 1.
Door Removal
1. Unplug refrigerator or disconnect power.
2. Open both refrigerator doors. Remove the base grille by
pulling up on the bottom outside corners. See Graphic 2.
Close both doors and keep them closed until you are ready to
lift them free from the cabinet.
3,
4. Remove top left hinge cover and screws as shown. See
Graphic 3. Do not remove screw A.
5. Carefully lift freezer door straight up off bottom hinge. See
Graphic 4.
6. Remove top right hinge cover and screws as shown. See
Graphic 5. Do not remove screw A.
7. Carefully lift refrigerator door straight up off bottom hinge.
See Graphic 4.
8. It may not be necessary to remove the bottom hinge to move
the refrigerator through a doorway. Both bottom hinges have
similar construction.
• Disassemble the hinges as shown. See Graphic 6. Do not
remove screw A.