Self-Clean Time Length; To Set The Controls For A Self-Clean Cycle Or A Delayed Start; When The Self-Clean Cycle Is Completed; Stopping Or Interrupting A Self-Cleaning Cycle - Kenmore 790.4676 Series Use & Care Manual

Self-Cleaning (cant'd)
Self-Clean Time Length
For satisfactory results, use a 2 hour Self-Clean cycle for llght soils, a 3 hour cycle for average, and a 4 hour cycle for
heavy soils. NOTE: The kitchen area should be well ventilated using an open window, ventilation fan or exhaust hood during
the Self-Clean
cycle.
This will help eliminate the normal odors associated with the Self-Clean cycle.
To Set the Controls for a Self-Clean Cycle or a Delayed Start Self-Clean Cycle:
(Note: If you do not want to start a Delayed Self-Clean Cycle, skip steps 2 & 3.)
1. Be sure the clock shows the correct time of day.
2. Press pad. The : in the time of day will flash.
3. Press and hold the A pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired
time isdisplayed.
4. Press paa. - appears m the display.
5. Press the A or V pad once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press
V pad. "2:00" appears in the display. To select a 4 hour cycle press A pad. "4:00" appears in the display.
As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCI<" indicator light
will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).
6. "CLn" will appear in the display during the Self-Clean cycle and the "LOCI<" light will glow until the Self-Cleaning cycle
is complete or cancelled and the oven temperature has cooled.
When the Self-Clean Cycle is Completed:
1. The time of day or "End" wiii appear in the display window and the "Clean" and "LOCI<" light wiii continue to glow.
2. Once the oven has cooled down for about 1 HOUR and the "LOCI<" light has gone out, the oven door can be opened.
3. If "End" is in the display and the Select Clean indicator light remains ON, press (ST_P)pad. The time of day will appear
in the display.
NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.
Stopping or Interruptlng a Self-Cleanlng Cycle
If it becomes necessary to stop or interrupt a Self-Cleaning cycle:
1. Press (s_P) pad.
2. Once tF_ oven has cooled down for about 1 HOUR and the "LOCI<" light has gone out, the oven door can be opened.
w
3. Restart the Self-Clean cycle once all conditions have been corrected.
_To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side
of the oven when opening the door to allow hot air or steam to escape.
_DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and
avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.
19