Power Cord - Samsung VAC-5800 SERIES Operating Lnstructions

ASSEMBLING THE VACUUM-CLEANER READY FOR USE
1) Connect the suction hose to the cyclone filter.
3) Connect the suction tubes together (depend-
ing on model).
4) Connect the nozzle to the suction tube.

POWER CORD

1) PULLING OUT
The power cord is long enough to be drawn out for
convenience.
2) REWINDING
When you have finished cleaning, disconnect the plug
from the electrical outlet and simply press the cord
rewind button lightly with your toe.
NOTE :
When removing the power cord from the electrical outlet, grasp the plug, not the cord.
NOTE :
For your convenience, the handle has two functions. It can be used as a "handle" to carry
the unit. It is also the cord rewind button that can be used to rewind the power cord.
2) Connect the cyclone filter to the suction tube.
OPTION :
EXTENDING : Holding the narrow part of the
telescopic tube with one hand, pull the handle in
the opposite direction with your other hand.
SHORTENING : Holding the narrow part of
the telescopic tube with one hand, push the
handle towards it using the other hand.
- Adjustable telescopic tube not available
with all models.
5) Connect the body connector to the body of the
cleaner.
EN-3