Sharp WX-T71 User Manual page 123

Note
• If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is
displayed. Press [Yes] to deactivate.
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent
other phones from recognising your phone, turn the
Bluetooth wireless function off automatically to save
battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in
other devices when your phone is detected.
→
"Connectivity" "Bluetooth"
→
Settings" "Device Name"
1.
Enter the new device name.
To Turn Off Automatically
→
"Connectivity" "Bluetooth"
→
Settings" "Bluetooth Timeout"
1.
Select the desired time.
Your phone turns the function off automatically in
the specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the
phone.
122 Connectivity
→
"Bluetooth
→
"Bluetooth
→
"Connectivity" "Bluetooth"
→
Settings" "Handsfree Setting"
1.
Select "Private mode" or "Handsfree mode".
"Private mode": For talking with the handset
"Handsfree mode": For talking with the handsfree kit
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX
data to authenticate the passcode (exchanging the
passcode) before pairing devices.
→
"Connectivity" "Bluetooth"
→
Settings" "Authentication"
1.
Select "On" or "Off ".
Note
• No authentication is required for the paired devices.
• Even if you select "Off ", you may authenticate the
passcode when the sender requests it.
To See Your Phone Details
→
"Connectivity" "Bluetooth"
→
Settings" "My Phone Details"
→
"Bluetooth
→
"Bluetooth
→
"Bluetooth