Table of Contents
Advertisement
Settings
(M 9)
Profiles
(M 9-1)
The tone sound and vibration settings can be
customised for each profile according to your
environment.
There are 6 profiles: "Normal", "Meeting", "Activity",
"Car", "Headset" and "Silent".
Activating a Profile
→
"Settings"
"Profiles"
1.
Select the desired profile.
Note
• When a profile is set, the corresponding indicator
described on page 21 is displayed in standby.
Tip
• Long press R to switch Profiles settings between
the mode most recently activated and Silent mode in
standby.
Resetting Profile Settings
→
"Settings"
"Profiles"
1.
Highlight the profile you wish to reset.
2.
Press [Options] and select "Set to Default".
3.
Enter your handset code.
The default handset code is "9999". For details on
changing the handset code, see "To Change the
Handset Code" on page 116.
Ringer Volume
You can adjust the ringer and general volume.
→
"Settings"
"Profiles"
1.
Highlight the profile you wish to customise.
2.
Press [Options] and select "Personalise".
3.
Select "Volume".
Each current volume level is displayed.
4.
Select "For Incoming Call", "For New Message" or
"General Volume".
Press a (or d) to increase the ringer volume or
5.
press b (or c) to decrease the ringer volume and
then press
.
To select "Increasing Volume", press a (or d) at
level 5.
To select "Silent", press b (or c) at level 1.
Settings
101
Advertisement
Table of Contents
