Table of Contents
Advertisement
1. Tap on Start > Settings > Bluetooth.
2. On the Mode tab, select Turn on Bluetooth.
3. Select an item you want to beam. For example, open a task in Tasks.
4. Tap Menu > Beam.
5. Tap the destination device. If the target device does not appear in the list, ensure that the device is turned on,
discoverable, and within close range of the device.
6. Tap OK after the transfer is done.
Setting up the Device as a Bluetooth Modem
When the device is connected to your PC by using Bluetooth, You can connect your PC to the Internet by using the
device's networking capability.
1. Establish a Bluetooth partnership between the device and your PC (refer to the section "Creating a Bluetooth
Partnership" in this chapter) and turn on Bluetooth on the device and your PC.
2. Tap on Start > Internet Sharing.
3. In PC Connection, select Bluetooth PAN.
4. In Network Connection, select the connection that you want to use.
5. Tap Connect on the device.
6. Set up a Bluetooth PAN (Personal Area Network) on your PC.
7. Tap Connect on the device.
6.5 USB Connections
A USB connection is a wired connection that lets you connect the device to your computer for synchronizing data.
With a USB connection, you can connect your PC to the Internet by using the device's networking capability and
copy or move files between your PC and your device.
You have to install ActiveSync or WMDC (see chapter three for more information) on your PC in order to use a
USB connection.
Transferring Files
1. Connect the device to your PC with a USB cable.
2. On your PC, open the folder to or from which you want to copy or move a file.
3. Right-click the file that you want to copy or move, then click Copy or Cut.
4. Scroll to and then click Mobile Device, open the folder to or from which you want to copy or move a file. Right-
click in the folder that you want to move it to, and then click Copy, Cut or Paste.
5. Click OK when the File Conversion dialog box appears.
Changing USB-to-PC Connection Type
In some cases, you may find ActiveSync or WMDC do not recognize the device when it is connected to your PC
with a USB cable, or you may find your PC disconnects the connections with the device when your PC is connected
to the Internet or a local network. If this happens, try the following to resolve sync connection problems.
1. Tap Start > Settings > Connections > USB to PC.
2. Select or clear Enable advanced network functionality.
3. Tap OK.
Page | 41
Advertisement
Table of Contents
