Scene Setup - Honeywell Tuxedo Touch Series Home Automation System User Manual

Scene Setup

The "Scene" feature is used to control the function of a single device, or multiple devices based on pre-set Conditions, Triggers, and
Actions. When the trigger/condition occurs, the action is executed. Define a Scene as follows:
ICON
1. At the Tuxedo Touch Keypad:
a) Press the Automation and Scene Setup icons
to display the "Scene Management" screen.
b) Press the Add icon to set up a Scene.
c) Press the Name box, enter a Scene Name and
press OK.
d) Select a "Condition," "Trigger," and "Action"
that you want to occur for this Scene. See
example below.
Scene Icons
Add
Edit
Scene Rules
• Triggers and Conditions include: Time setting, Security mode, Thermostat setting, Door status and Zones.
• Actions include: Security mode, Lights on/off, Thermostat setting, and Door Lock status.
• Each Trigger event can have up to 3 Actions.
• A Trigger event and Condition cannot be the same (i.e., if setting a Trigger event for Security, you cannot set a Security
Condition).
• A total of 10 Scenes can be created.
On commercial panels the programming option for "Global Keypad" must be set to "0" for some Scenes to work
•
properly.
Note: Determine if you need a Condition. The Condition is a 'pre-condition' set to occur prior to a trigger event. See
example below.
Example: Turn the lights on, when the system is disarmed, only at night.
(Condition) ... "only at Night"
(Trigger) ... "when the "system is Disarmed" ...Set the Trigger to SECURITY: System Disarm
(Action) ... "Turn the "lights ON" ...
Automation (cont'd)
ACTION
Delete
...Set the TIME condition (enter the Start Time and End Time).
... Set the Action to LIGHT: ON
NOTES
Enter the new device name by entering it on the data entry keyboard.
• Use the Shift icon for capital letters.
• Use the BS (Backspace) icon to make corrections.
The @#$ icon is not available for use at this time.
After each selection press Save!! !
After each selection is complete, press Save to keep the settings, press
Delete to cancel, or Edit to change your selections.
37