Honeywell Tuxedo Touch Series Home Automation System User Manual page 32

ICON
7. Select the Z-Wave Basic Command Set On icon to turn On all lamp
modules, dimmer On/Off switches and receptacles.
8. Select the Z-Wave Basic Command Set Off icon to turn Off all lamp
modules, dimmer On/Off switches and receptacles.
Night Setup
To set the NIGHT function, press the System Setup and Advanced Setup icon and then do the following:
ICON
1. Enter your Authorized Code, if required.
2. Press the Night Setup icon.
3. Select the arming mode to be activated when NIGHT is
selected on the "Arming" screen.
Output Setup Function
The Output Setup screen displays output selections. A maximum of 18 outputs can be enabled or disabled on the Output screen.
To set the Output Setup function, press the System Setup and Advanced Setup icon and then do the following:
ICON
1. Enter your Authorized Code, if required.
2. Press the Output Setup icon.
3. Select the outputs to display on the Output screen
by pressing enable or disable and then press Apply.
Output Setup Icons
Output Disable
Output Enable
User System Setup (cont'd)
ACTION
ACTION
ACTION
Apply Back
32
Note: This command does not control door
locks or any other security enabled devices.
NOTES
The NIGHT function can be set to arm the system in one of five
arming modes: Away - Stay - Instant - Night –Maximum.
Apply accepts the setting. Back cancels your selection.
NOTES
This is a local setting for the graphic keypad. If user has the
maximum number of keypads on the system, and wants to disable
the same output for all, each keypad needs to be set individually.
Apply accepts the setting. Back cancels your selection.
NOTES