Installing On A Flat Surface - Honeywell NetAXS-123 Installation Manual

Installing the NetAXS-123 Panels
Installation

3.1.3 Installing on a Flat Surface

1. Review the panel layout, cable runs, and power needs.
2. Mount the back of the enclosure on the surface, either with drywall screes or threaded wall
3. Break off the appropriate plastic wiring tabs, using pliers.
4. Perform steps 3 through 10 in
16 www.honeywell.com
anchors.
panel over a horizontal surface.
Installing on a Wall, page 11 to complete the installation of the