Connecting To A 3G Network - Archos 502048 User Manual

CONNECTING TO A 3G NETWORK

Your ARCHOS device is equipped with a slot on its back for the tailor-made ARCHOS G9 3G stick. Only the
Archos G9 3G stick is designed to fit this slot. There is no compatibility with other 3G sticks. Note that the
ARCHOS G9 3G stick will only have signal if you are in an area covered by your 3G provider's 3G or EDGE
network.
1. Remove the Archos G9 3G stick cap, and push the unmarked side of the
case towards the plug.
2. Insert the SIM card into its slot. Make sure to insert the SIM card
properly.
3. Put back the case.
4. Remove the marked case "ARCHOS".
5. On your ARCHOS device, remove the protective cover of the 3G stick
slot.
6. Plug the Archos G9 3G stick.
7. At the bottom right hand of the screen, touch the time in the status bar.
The status dashboard is displayed.
8. Touch the time in the status dashboard. The setting dashboard is
displayed below.
9. If the 3G is off, slide the 3G switch to the On position.
The device is automatically detected.
10. Follow the on-screen instructions.
NOTE: for more information you can consult the Archos G9 3G stick user manual.
The Archos G9 3G stick is purchasable on www.archos.com or from your local
retailer.
► S ee the full manual for further information about the interface.
1
2
5
5