Preparing The Opening - Kenmore 42414 Installation Instructions Manual

Installation Instructions
PREPARING THE OPENING
[] MAINTAIN THE FOLLOWING
MINIMUM CLEARANCE
DIMENSIONS
13" MAX. Depth of uprotected 2" MIN.
overhead cabinets Clearance from
cutout to side
| H wall on the right
' II°ftheunit
Clearance from _ ,'_'_8" MIN H i h_
I countertop to / /frOm r_*',n; eg_
I unprotected i / I_ / tOnearest ......
overhead in n i her
I ,, _,_ _- .,.--'...-L / cab eto et
s.rf___. __ _ side of unit
2" MIN, Clearance __ _1
"
[] OVERALL COOKTOP
DIMENSIONS
36" _--_20-3/8 L ,,
Cooktop _-- 4-5/8" Rear
% ........ _'_J_ at the conduit
_ ....._ I Iocetion
18-7/8"
[] MINIMUM VERTICAL
CLEARANCE
Five inches (5") minimum vertical clearance
between the cooktop bottom and any
combustible surfaces,
I ' '_i
5" Min.
Vertical Clearance
[] CUTOUT DIMENSIONS OF
COUNTERTOP
To ensure accuracy, it is best to make a
template when cutting the opening in the
counter.
19-1/8" width of cut
1-3/4" Min, Betwee_
cutout and the wall
behind the cooktop
2-1/2" Min,
from front edge
of cutout and
front edge of
countertop
[] WALL COVERINGS,
COUNTERTOP AND CABINETS
Make sure the wall coverings, countertop and
cabinets around the cooktop can withstand
heat (up to 200°F) generated by the cooktop.
W ite Ver 0'
I countertop must I
I withstand heat I
I up to 2OO°F
4