Kenmore 42414 Installation Instructions Manual page 7

Installation Instructions
INSTALLATIONmE LECTRICAL CONNECTIONS
[] When making the wire connections, use
the entire length of conduit provided.
The conduit must not be shortened.
[] With the cooktop in place, open the front
of the cabinet door.
[] Insert the wires from the conduit through
the opening of the junction box.
GroundRed __
Black
Strain Relief Clamp
[] Connect the red and black leads from the
cooktop conduit to the corresponding
leads in the junction box.
Ground wire Black
location
[] Once the connections are made, secure
wires together using wire nuts.
Red
Relief Clarnp
Black
Ground
GROUNDING INSTRUCTIONS:
The bare ground wire in the conduit is
connected to the cooktop frame. Effective
January 1, 1996, the National Electrical Code
will not permit grounding through neutral.
If used in new construction after January 1,
1996 or in a mobile home, recreational
vehicle or if local codes do not permit
grounding through the neutral white lead,
attach the appliance grounding lead (green
or copper) to the residence grounding
conductor (green or bare copper) in
accordance with local codes. When
connecting to a 3 conductor branch circuit,
if local codes permit, connect the bare
ground connector lead of the cooktop to the
branch circuit neutral (gray or white in color).
IMPORTANT:
if the cooktop is being
installed into a blind counter (one with no
cabinet opening below), wire connections
must be made before putting the cooktop
into the cutout opening.
7