Adjust The Exhaust Adaptor; Connecting Ductwork - GE JVM1430 Installation Instructions Manual

Installation Instructions
CabinetFront
CabinetBottomShelf
Filler Block
T quivalentto
Depth
of Cabinet
Recess
[] Insert 2 self:aligning screws
thrrmgh outer top (abinet
holes. Turn two fllll turns on
each
sciew.
n
[] Tighten center
screw completely.
[] Tighten tile outer two screws to tile top of tile
microwave oven. ('vVhile tightening screws, hold
the microwave oven in pla(e against the wall and
the top cabinet.)
1400and 1600Series 1800Series
[] Install grease filters. See the Owner's Manual
parked with the mi(rowave.
ADJUST THE EXHAUST
ADAPTOR
Open the top cabinet and at{just tile exhaust adaptor
to connect tr) tile house duct.
Backof
Blower Plate Damper Microwave
For Front-to-Back o r
Side-to-Side
Adjustment,Slidethe
ExhaustAdaptoras
Needed
I-_ CONNECTING DUCTWORK
House Duct
[]Extend tile hr)use
duct
dr)wn tr) connect to
tile exhaust adaptor.
[] Seal exhaust du(t.joints using du(t tape.
14