GE G Owner's Manual page 85

Byusing the USB cable, y oucantransfer
thecaptured photos andvideos to a PC.
Follow the stepsbelowto connect t he
camera t oa PC.
1. Start a computer to which ArcSoft
software has been installed.
2. Make sure both the camera and PCare
turned on.
3. Connect one end of the supplied USB
cable to the USB/AVOUT port on your
camera.
4. Connect the other end of the cable to
an available USBport on your PC.
5. Disconnect the camera once transfer is
completed.
If the USB option is set to [PC]"
Turn the camera off and disconnect the USB
cable.
If the USB option is set to [PC (PTP) ] :
Remove the camera from the system as described
below before turning the camera off and
disconnecting the USBcable.
Window XP Home Edition/XP Professional
Click the [Safely Remove Hardware] icon ( )
in the taskbar and select [Safely remove USB
Hess Storage Device] from the menu displayed.
' Remove Hardware