Table of Contents
Advertisement
12
en | Universal Monitor Mount Models
UMM-LW-30B
4
M4 x 10 mm screws (E)
(see Figure 3.4 on page 19 for a dimensional
drawing)
1
Level (F)
1
Wrench (G)
2.2.2 Installing the UMM-LW-30B Tilt/Swivel Wall Mount
To install the wall mount:
1.
Disassemble the VESA mounting plate (A) from the wall bracket (B) by
removing the thumb screw on the wall bracket. Retain the thumb screw for
later use.
2.
Determine the location on the wall that you will attach the wall bracket (B).
Use Table 2.2, on page 10, for recommended mounting surfaces.
F.01U.115.026 | 3.0 | 2008.12
Mounting Guide
Universal Monitor Mounts
Bosch Security Systems, Inc.
Advertisement
Table of Contents
