Setting Up Wireless Encryption - Asus WL-500gP User Manual

2) Setting up wireless encryption

WL-500gP provides a set of encryption and authentication
methods to meet the different demands of home, SOHO,
and enterprise users. Before setting up encryption and
authentication for WL-500gP, contact your network
administrator for advice.
Click Wireless -> Interface to open the configuration page.
Encryption
The encrytion modes supported by WL-500gP are: WEP (64bits), WEP (128bits),
TKIP, AES, and TKIP+AES.
WEP stands for Wired Equivalent Privacy, it uses 64bits or 128bits static keys
to encrypt the data for wireless transmission. To setup WEP keys, set WEP
Encryption to WEP-64bits or WEP-128bits, then manually type in four sets
WEP Keys (10 hexadicimal digits for 64-bit key or 26 hexadicimal digits for
128-bit key). You can also let the system generate the keys by entering a
Passphrase.
TKIP stands for Temporal Key Integrity Protocol. TKIP dynamically generates
unique keys to encrypt every data packet in a wireless session.
AES stands for Advanced Encryption Standard. This solution offers stronger
protection and increases the complexity of wireless encryption.
TKIP+AES is used when both WPA and WPA2 clients co-exist in the wireless
network.
WL-500gP Wireless Router User Manual
13